Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped functioning, it could be due to a dead coin-cell battery or damaged receiver modules, water issues, or a defective chip. Luckily these are all easy to fix and you'll get your vehicle back to normal in no time!
The key blade can become worn out and lead to a malfunctioning car key. It is easy to solve this issue by visiting your local Car Key Man Auto Locksmith to get a new blade installed.
Battery
The key fob on your Peugeot 308 may die or become weak enough to not send a powerful signal. peugeot partner van key can cease to function and stop you from locking or unlocking your doors, or starting the engine. You'll need a replacement battery for your key fob to correct this.
You'll need to purchase a replacement battery from an auto parts store or your local hardware store. Make sure that the battery is brand new and not sat on the counter for too long. A brand new battery is more capacity and will send a stronger signal to your car.
After replacing the battery, try unlocking and locking the doors of your Peugeot by using the key fob. If the doors aren't unlocking then the receiver module in the car is responsible. The local Peugeot dealer can reprogramme the receiver module.
It's possible that the chip inside your key fob is damaged. This could happen if you drop your key fob on the ground or expose it to water. The rubber seals that protect the chip from moisture might become worn down over time particularly if your key fob is exposed to water for prolonged durations, like submerging it in the ocean at the beach. To avoid this happening, it's essential to protect your key fob from moisture and to never let it come in contact with water.
Water Damage
If your key fob is soaked and soaked, whether you tossed it into the pool or fumbled it into a puddle don't think it's a case of lost cause. Although the key fob is equipped with rubber seals which should shield it from water, prolonged exposure to water may result in damage to its electronic chip. Because water is an excellent conductor so any water that gets inside the key fob will cause a series of short circuits that will eventually ruin the chip. After removing the battery, scrub the contacts with isopropyl alcohol, and dry it completely before putting it back into.
Your Peugeot 308 may not start due to a dead battery. Jumper cables are an excellent way to restart the engine when you have an extra car. If the battery is causing the problem then it must be replaced.
Another reason could be a bad receiver in the vehicle, which may prevent it from receiving a signal from the key fob. The key fob may be damaged, or there could be a problem with the antenna, wiring or even the key fob itself. If you have a new key fob it could need to be programmed for the vehicle. If you're unable to solve the issue yourself then contact a professional technician. A technician who is trained in the field will be able detect the issue quickly and then fix it right away.
Radio Interference
Interference may cause symptoms such as a key fob that is not recognized or has a narrow range. This is either radiated or conducted, with the former being caused by power supply cables or speakers wiring that are too close to electrical components. In general, rerouting cables and moving them away from these components will resolve the problem.
It's unlikely that anyone is listening in on the key fob's signals to steal your car, however it's possible that your signal is being distorted by radio frequency interference. This is a simple issue to solve.
If you are having key fobs that aren't being recognized, try a new battery. Also, ensure that the battery is the correct size and type. Batteries of the wrong size can damage your fob.
These devices may interfere with the key signal if they operate on the same radio frequency. Beware of attaching these devices to your key fob.
Pairing Issues
The remote keyless entry system in cars has a receiver that receives radio frequencies from the key fob. You will not be able start your vehicle if this receiver is malfunctioning even if the key fob is working and can be reprogrammed. This issue can be caused in a number of ways, such as a dead coin-cell battery or water damage. The receiver could also be malfunctioning due an internal or software issue or damage to the key itself.
One of the most frequent reasons your Peugeot 308 key fob isn't functioning is that the battery inside has failed. This battery can be replaced, but you need to make sure that it is the proper battery for your key fob. It is recommended to use batteries that are the same size as well as voltage and specifications as the original.
Another reason your Peugeot 308 key fob might not be working is that it is connected to another vehicle. You could have accidentally handed your key fob a friend or it was used to unlock other vehicles. You can resolve this by reprogramming the fob using an OBDII scanner. This scanner will typically ask you for certain information about your vehicle, such as the VIN or engine type, so it is essential to enter this correctly.